Radar and Microwave Remote Sensing - Lecture Note - Completely Remote Sensing tutorial, GPS, and GIS - facegis.com
Radar and Microwave Remote Sensing

Radar Defined

Radar is an acronym for Radio Detection and Ranging. Radar is an active sensor systems. It generates its own illumination as an outgoing signal that interacts with the target such that some of the signal is returned as backscatter that is picked up by the same antenna that emitted the radar beam. Radar operates in part of the microwave region of the electromagnetic spectrum, specifically in the frequency interval from 40,000 to 300 megahertz (MHz). The latter frequency extends into the higher frequencies of the broadcast-radio region. Commonly used frequencies and their corresponding wavelengths are specified by a band nomenclature, as follows:

  • Ka Band: Frequncy 40,000-26,000 MHz; Wavelength (0.8-1.1 cm)

  • K Band: 26,500-18,500 MHz; (1.1-1.7 cm)

  • X Band: 12,500-8,000 MHz; (2.4-3.8 cm)

  • C Band: 8,000-4,000 MHz; (3.8-7.5 cm)

  • L Band: 2,000-1,000 MHz; (15.0-30.0 cm)

  • P Band: 1,000- 300 MHz; (30.0-100.0 cm)

This chart summarizes the above information on Bands in the Microwave segment of the EM Spectrum:

The Microwave Band assignments

Unlike other sensors that passively sense radiation from targets illuminated by the Sun or thermal sources, radar generates its own illumination (hence, it is active; another example is the flash camera) by sending bursts or pulses of EM energy that reflect off of a target. A fraction of the reflected energy then returns to the radar’s receiving antenna, which collects it and passes it to an electronic processing system. A radar system is a ranging device that measures distances as a function of round trip travel times (at light speed) of a directed beam of pulses (the signal, whose strength is measured in decibels, dB) spread out over specific distances. In this way radar determines the direction and distance from the instrument (fixed or moving) to an energy-scattering object. We can also derive information about target shapes and certain diagnostic physical properties of materials at and just below the surface, or from within the atmosphere, by analyzing signal modifications.

By supplying its own illumination, radar can function day and night and, for some wavelengths, without significant interference from blocking atmospheric conditions (e.g., clouds). These characteristics prompted radar development in World War II for tracking (attacking) aircraft and ships. Ground (fixed) and airborne (mobile) radar systems are used extensively today for marine navigation and air traffic control. Imaging radar, mounted on air or space platforms, has proven especially useful in mapping cloud-shrouded land surfaces (a landforms map of Panama used this approach). This use also permits expressing surface shapes in regions heavily covered by vegetation (penetrated by some bands).

As we shall see in this Section, radar has become increasingly important in various applications of remote sensing. The military continues to be a prime user. Several satellites operating now have radar has their principal sensor. Most of us are most familiar with radar's use in Meteorology, mainly as a tracker of storms, rainfall, and advancing fronts. We will skip further reference to this last use in this Section; it is defered until Section 14 that deals with Meteorological Remote Sensing.

This ability to mirror ground surfaces for displaying topography is a prime use of radar for a variety of applications. Some radars operate on moving platforms; others are fixed on the ground. The usefulness in determining land surface configurations is strikingly confirmed in the radar image strip (SIR-A system on the Shuttle) shown here, extending 300 km (200 mi) to the northeast (right side) across the folded and dissected South American Andes in Bolivia. The image covers from the high plains (Altiplano) on the west to the lowlands (Amazon Basin) on the east. (Scroll to see this right end.)

B/W SIR-A radar image of the South American Andes, Bolivia.

Radar systems, as well as passive sensors operating at microwave wavelengths (slightly shorter than radar), are also effective in detecting soil moisture, storms-clouds-rain, and sea states.

Radar has operated on the ground and from aircraft for more than a half century. These are typical radar images taken from moving aircraft:

Radar image of an unidentified area in the mountains of Arkansas.
Radar image of San Francisco.
Airborne multiband radar image of the San Andreas fault, the Crystal Springs reservoir, and part of San Mateo, California, south of San Francisco.

Radar systems are now being routinely sent into space to image the entire Earth. Some of these are multiband and multipolarization radars; this allows color composites to be constructed. This is a typical multiband satellite radar (SAR or Synthetic Aperture Radar) image, showing part of Death Valley in California, and surrounding mountains:

SAR image of part of the Death Valley region.

Source: http://rst.gsfc.nasa.gov