Seasat Images - Lecture Note - Completely Remote Sensing tutorial, GPS, and GIS -
Seasat Images

Military aircraft were the first to fly radar units during World War II. These units used very long (1 to 10 m) wavelengths that extended into the radio region of the EM spectrum. Airborne SLAR systems were developed soon thereafter. The first radar systems in space had military applications, so the resulting imagery was classified. The first civilian use of spaceborne radar was the Seasat system operated for NASA by the Jet Propulsion Laboratory (JPL). A synopsis of its history is found at this JPL site. The spacecraft and its systems are shown here:

The Seasat spacecraft.

Launched on June 26, 1978, the onboard SAR radar lasted only 99 days before a circuit failed, causing it and other sensors to quit. During normal operations, its L-band (23.5 cm) transmitter produced a focused 1 x 6 degree HH-polarized beam pointed starboard (right) at 20 degree off nadir (vertical). From a slightly elliptical, nearly polar orbit at a nominal altitude of 790 km (491 mi), Seasat's radar had an outward swath width of 100 km (62 mi), giving an image that was printed as four individual strips of 25 km each and then combined to make a full-width image. Along any track (retraced every 24 days), this swath had near and far boundaries that lay between 24 and 240 km (15-150 mi) off nadir. The high depression angles (between 67 and 73 degrees), reduced shadow effects in rugged terrains but induced notable layover. The resolutions achieved by the radar depended on the method by which the synthetic aperture data was processed. With an optical correlator, image resolutions were as low as 70-80 m (230-262 ft), but a digital correlator improved the resolution to about 25 m (82 ft).

Seasat's principal mission was to study various properties at and near the ocean surface, including sea surface temperature, wind speeds, and wave heights. The SAR, with its low look angle, was designed to measure directions and wavelengths of ocean waves exceeding 50 m (164 ft) in fetch (distance between crests), and to look at sea ice. Below is an image made with the digital correlator of waves off Alaska's southern coastline near Yakutat (note the glaciers on land).

Seasat SAR image of waves off Alaskan coastline.

This Seasat image strip below shows sea ice off Banks Island, Canada.

Seasat SAR image of sea ice off Banks Island, Canada.

We already showed two Seasat images of land surfaces - the Pine Mountain and Harrisburg scenes. As another example, examine this Seasat image of central Jamaica in the Caribbean obtained through cloud cover on August 8, 1978; there is also some vegetation penetration.

Seasat image of part of central Jamaica, whose terrain is largely that of karst topography.

The image shows a variety of landforms: some of mountains that are foreshortened, areas of land use, and roughened offshore waters. Limestone beds govern much of the island's underlying geology. In this area of heavy rainfall, these beds readily dissolve to form typical karst topography.

Seasat was adept at showing both onland and submerged landforms. This next image covers much of southern Florida which, like Jamaica, is a limestone platform. Most of the Everglades shows here as dark (low signal returns) where water flow has spread out but the hardwood tree hammocks (streamlined elongate forms) are bright (white). The Florida Keys form a line of connected reefs at the bottom leading to Key West and in Florida Bay to the north the reefs (some submerged) are revealed by radar to be an interlocking network.

Southern Florida imaged by Seasat,

Similar to aerial radar imagery, space radar imagery is well suited to mosaics, as strikingly depicted below in this JPL mosaic of southern California. Use the Digital Elevation Map mosaic of nearly the same region that we presented in Section 7 on Mosaics, as a locator guide (i.e., find Los Angeles).

Seasat radar mosaic of southern California, made at JPL.

We can also co-register Seasat radar imagery with Landsat imagery. Below, we superimposed part of a Landsat image of dissected Allegheny Plateau in West Virginia (alone in the upper right), on a Seasat image giving a new impression of apparent relief by virtue of the light tones in the foreshortened foreslopes.

Seasat image of  the Allegheny Plateau of West Virginia merged with a Landsat false color composite of this area; the triangular portion of the image in the upper right is just the Landsat image alone.

Seasat included a second instrument, a radar altimeter, designed to measure height variations of the ocean surface and large waves imposed on the water. The generated pulses are sent directly downward (as close to vertical, or nadir, as possible [slight variations as the spacecraft wobbled]) and a large fraction of the energy is then reflected straight up. This is timed, so knowing pulse speed (that of light), the total duration or transit time is a measure of distance from Seasat to surface and back). Slight variations in transit time along track (orbital path) represent differences in elevation over the distance traversed.

This led to a remarkable result which proved a sensation among geoscientists and oceanographers. Look at this image, produced at the Lamont-Doherty Geological Observatory of Columbia University, New York:

Map showing the morphological features of the ocean floor produced at the Lamont-Doherty Geological Observatory of Columbia University, New York, using Seasat radar altimetry data as a major input.

The map shows the morphological features of the ocean floor at a gross scale. These features are largely the mid-ocean ridges, the trenches, and the many transverse faults (those that segment the ridges at high angles) that emanate from either side of the ridges as the sea floor spreads in both directions away from these ridges. Amazingly, both the faults, which have cliff-like expressions. and the ridges have differential gravitational effects (being topographic highs and lows) that cause the surface waters to mirror these differences. This is what is picked up by the radar altimeter. The map has been color-manipulated to highlight (using blues and yellows) these differences. This altimeter map is very similar to the (integrated) maps produced over the years by depth soundings and other geophysical measurements of the ocean floors.